|
Vert ASA Install
This mod is so that you can use an aftermarket regulator,x-chamber,gas thru grip, or have a vertical tank on your Poison.
Parts needed
1) Automag vertica ladaptor w/screw
2) Macroline kit w/2 90ยบ elbows and hose. *
*Other hoses can be used.
3) Loctite or teflon
4) ASA Reducer
Tools needed
1) Drill with 1/4" bit
2) Corresponding Allen wrenches
Step 1
Take off the lower reciever. Then drill the hole in front of the lower reciever (Not under the ball detent or your screwed.) with the 1/4" bit so that the Automag vertical screw fits.
Step 2
Now attach the Automag vertical adaptor and reattach the lower reciever to the gun.
Step 3
Put your in your asa reducer and screw the macroline fittings in. Now attach your macroline hose and your done!
|
Polishing The Internals
Materials:
Turtle Wax (Green Kind) (In case you don't know it's sold to polish cars.)
Two Old Rags (One to polish one to whip off)
Poison Internals
New O-Rings For The Internals (Optional)
Procedure:
1. If you haven't already take the internals out of your Poison.
2. Put wax on the internals and take one of the rags and bluff the wax in.
3. Using the other rag wipe the internals off.
4. Repeat steps two and three until your happy with the results.
5. If you have new o-rings then take off all the old ones using a old dental pick or screwdriver and put new ones on.
|
